Coway Airmega 100 · White
Match the Airmega 100 model and the documented filter. Use the room-fit worksheet rather than a retailer’s headline area claim.
ROOM FIT / TWO OR MORE UNITS
Estimate the nominal particle clean air delivered by two or three purifiers in the same room, using each unit’s independently published smoke CADR.
Use the selected models at the rated test speed. Each selector represents a separate physical unit.
NOMINAL SMOKE CADR
261 cfm
443.4 m³/h · 6.1 nominal clean air changes per hour
108 + 153 cfm
Both devices run in the same well-mixed room at the fan settings corresponding to their published smoke CADR. Add only smoke particle ratings and divide the combined cfm × 60 by the room volume in cubic feet. Use each model’s own listed rating; selecting the same model twice assumes you have two units.
This is a nominal calculation, not a test of the combined setup. It does not predict a removal percentage, establish VOC removal, or apply across rooms. Lower fan speeds, placement and uneven mixing can change actual performance. Check the individual rating sources or read the full method.
Change the tool inputs to see relevant references. Compatibility remains a separate check.
As an Amazon Associate I earn from qualifying purchases. These are optional references, not product tests or live offers.
Match the Airmega 100 model and the documented filter. Use the room-fit worksheet rather than a retailer’s headline area claim.
A separate Airmega model and filter family. Check the exact regional label before using the documented room-fit figures.
The 250 model, separate from the 250S Wi-Fi version. Check the matching filter and the source notes in the room-fit catalogue.
Keep 311i Max separate from 311i+ Max and older 311 models when choosing a replacement filter.
The Coway-branded Max2 filter set documented for Airmega 250 and 250S. Match the appliance label and package code; this is separate from the washable pre-filter.
A US outlet energy meter for the power worksheet. Check electrical limits; measured watts are not smoke CADR or proof of purification.
A humidity and temperature reference for checking a room while using moisture-control equipment. Check placement and Bluetooth range; it does not measure airborne particles or CO.
A top-fill ultrasonic humidifier for adding moisture. Follow the water-quality and cleaning instructions and monitor room humidity; it is not an air purifier.
The single-pack battery-operated SMI100, separate from the hardwired SMI100-AC. Check local requirements and alarm testing instructions; this model is not a CO alarm.
A battery-operated carbon monoxide alarm. It is not a smoke alarm or a carbon-dioxide meter; check the exact local model and placement instructions.
The battery-operated SMCO100 combination alarm. Check local requirements and the manufacturer’s placement and testing instructions; an air-quality monitor does not replace it.
A CO₂, temperature, humidity and pressure monitor for following room conditions. CO₂ readings are not smoke CADR and this is not a carbon-monoxide alarm.
Room planner · Check exact filter codes · Particle and gas limits